Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Tempe, AZ
Chimney inspection in Tempe is rarely about thick creosote. It’s about a flue that sat unused through ten months of desert heat, took in dust, palm fronds and monsoon rain, and now needs an honest look before the next cold snap. We work on Tempe’s 1960s – 1980s ranch homes and 1990s – 2000s stucco tract houses, both masonry fireplaces and factory-built metal fireboxes, and we diagnose before we recommend anything. Call (833) 906-6774 and we’ll book a sweep or inspection that fits how your Tempe home actually gets used. Inspect first, recommend second.
Why Tempe Homes Are Different
Tempe’s fireplace season is inverted, and that changes almost everything about the work. Most households here light one or two fires during a December or January cold snap. The other ten months, that chimney sits in 100°F-plus heat collecting dust, nesting birds and monsoon-blown debris. So the call that matters in Tempe is a pre-season inspection and cap check in fall, not a mid-winter soot sweep.
Housing stock shapes the rest. Across the 85281 ZIP and the neighborhoods around it, most fireplaces sit in 1960s – 1980s ranch homes and 1990s – 2000s stucco tract houses – typically single-story with masonry fireplaces or factory-built metal fireboxes and short exterior chimneys. Near downtown there’s also a small stock of historic mill-era homes, where the chimney was built for a different fuel and a different era of codes. Add extreme summer heat and a June – September monsoon, and what we find on Tempe roofs is usually sun-cracked caps and dried-out flashing rather than heavy creosote. In the older neighborhoods around ASU and downtown, an uncapped flue that hasn’t seen a real fire in years is a standing invitation for a downpour to run straight down it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Tempe Services
Two calls dominate in Tempe: a seasonal sweep before the first fire, and a repair once the inspection turns up something cracked, loose or rusted.
Chimney Sweep in Tempe
A Tempe sweep looks different from a snow-belt sweep. Because fires are rare, the deposit we pull out here is more desert dust, bird nest material and wind-driven debris than dense creosote, and we check the cap and screen while we’re up there since that’s where the monsoon damage usually starts. We use drop cloths and a sealed vacuum so nothing drifts into the living room, and you get a photo record of what came out of the flue. Book Chimney Sweep in Tempe before your first cold-snap fire and the chimney starts the season clean and capped.

Chimney Repair in Tempe
Heat does the damage here more than fire. UV and 100°F-plus summers dry out and crack rooftop caps and flashing, and monsoon wind drives debris into flues that then trap water. When we repair a Tempe chimney, we match the part to the system – Famco and Olympia Chimney components for caps, dampers and draft hardware, HeatShield ceramic resurfacing when a flue liner is cracked but still structurally sound. We tell you plainly when a repair can safely wait. See Chimney Repair in Tempe for the repair side of the job.

Chimney Inspection in Tempe
Chimney inspection in Tempe is mostly a pre-season job, and it’s the service most homes here actually need. Because a Tempe household lights one or two fires a year, the chimney’s real enemy between fires is dust, nesting birds, monsoon debris and UV-cracked caps on short exterior chimneys – not heavy soot. That’s why we recommend a fall inspection before the first cold snap rather than a mid-winter sweep: it’s the last cheap moment to catch a cracked cap before rain gets into an uncapped flue. Our Chimney Inspection covers the firebox, flue, cap and flashing, and you get photos of what we found so nothing is taken on faith.
Fireplace Inspection
Signs you need it
You’re about to light the season’s first fire and can’t remember the last time anyone looked at the firebox, damper or smoke shelf – or you’ve noticed soot staining above the opening or a damper that sticks.
What it costs in Tempe
A standard fireplace and chimney inspection in Tempe typically runs $150 – $350, with a camera-assisted Level 2 inspection in the $250 – $600 range, and the written estimate you receive sets the final price.
How we do it
We inspect the firebox brickwork and mortar joints, work the damper through its full range, check the smoke shelf and flue throat, look at the cap and flashing from the roof, and photograph anything that needs attention.
Chimney Flue Inspection
Signs you need it
A factory-built metal firebox in a 1990s or 2000s Tempe tract house with a short exterior flue is exactly the setup where a rusted or separated liner section hides until a camera goes in.
What it costs in Tempe
Flue inspection with camera work is typically $250 – $600 in Tempe depending on access and flue configuration, and every figure is an estimate until the written quote is in your hands.
How we do it
We run a camera down the flue from the top, record the liner joints and any gaps or rust, check draft at the firebox, and show you the footage before we recommend a thing.
Level 2 Chimney Inspection
Signs you need it
You’ve just bought a Tempe home, changed the appliance or fuel type, survived a chimney fire or a monsoon that sent water down the flue, or the basic inspection turned up something that needs a closer look.
What it costs in Tempe
A Level 2 inspection in Tempe is typically $250 – $600 because it includes camera documentation of the flue plus accessible attic and crawl space checks, and the written estimate fixes the final price.
How we do it
We inspect every accessible part of the system – firebox, flue with camera, cap, flashing, and the chimney’s exterior – photograph each finding, and hand you a written report you can act on or file away.
What Chimney Inspection Costs in Tempe
| Item | Typical range in Tempe |
|---|---|
| Standard fireplace and chimney inspection | $150 – $350 |
| Flue inspection with camera | $250 – $600 |
| Level 2 inspection (camera, attic and crawl space) | $250 – $600 |
How often should a Tempe chimney be inspected?
Once a year, and in Tempe the better timing is fall, before the December – January cold snaps, so a cracked cap or debris-blocked flue gets caught before rain and the first fire arrive together. Call (833) 906-6774 – estimates are free.
Do I need a Level 2 inspection if I just bought a Tempe house?
Yes. A Level 2 inspection is the standard for a home sale, a fuel or appliance change, or after a chimney fire, because the camera shows liner condition a basic look can’t. Call (833) 906-6774 and we’ll book it before you close.
Brands We Service in Tempe
We source and install from professional-grade chimney brands, including HeatShield for ceramic liner resurfacing, Gelco and Olympia Chimney for liner and draft components, and Famco for caps and dampers. We don’t claim stocked parts – each job is matched to the right manufacturer component for the system in your home. Turnaround depends on the part, and we tell you the honest timeline up front. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Tempe, AZ
| Service | Typical range in Tempe |
|---|---|
| Standard fireplace and chimney inspection | $150 – $350 |
| Flue inspection with camera | $250 – $600 |
| Level 2 inspection (camera, attic and crawl space) | $250 – $600 |
| Chimney sweep | $150 – $350 |
| Cap and flashing repair | $200 – $550 |
| HeatShield liner resurfacing | $1,200 – $2,800 |
| Full flue relining (DuraFlex) | $2,500 – $6,000 |
| Damper or draft component repair | $200 – $550 |
In Tempe, price is pushed up by access – a steep roof or a tall exterior chase takes more setup – and by what the camera finds in the flue. Short exterior chimneys on tract homes are usually straightforward; historic mill-era homes near downtown can need more careful work. We give you an upfront price in writing before anything starts, and nothing gets recommended that the photos don’t show.
Neighborhoods We Serve in Tempe
We work across Tempe, from the streets around ASU and downtown out to the ranch and stucco subdivisions on the city’s edges. The work is the same everywhere – a pre-season inspection and cap check in fall, a sweep before the first fire – but the findings vary: sun-cracked caps and monsoon debris on the newer tract homes, older flue configurations and water intrusion closer to downtown. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, means we can usually get a Tempe booking on the calendar within a few days.
- Downtown Tempe
- The neighborhoods around ASU
- South Tempe
- North Tempe
- West Tempe
Service Area – Cities Near Tempe
Tempe sits in the middle of the Valley, and we take bookings across the neighboring communities as well. If you’re just outside Tempe, we can still help – the desert conditions are the same, and so is the reasoning behind a fall inspection over a mid-winter sweep. We cover Phoenix, AZ, Gila Crossing, AZ, Maricopa Colony, AZ and St. Johns, AZ, and you can read about our home base at Chimney Sweep Avondale. Call (833) 906-6774 to check availability for your address.
Serving Tempe, AZ – Our Local Coverage Area
We serve Tempe and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Tempe
We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Most Tempe bookings land within a few days, and fall is the busiest window because that’s when homes here get inspected before the first fire. Call (833) 906-6774 to book.
It depends on the job. A sweep or inspection needs no permit, but a reline or structural repair may – ask the City of Tempe building department, and check your HOA rules on rooftop changes before work starts. We’ll tell you what the scope involves so you can ask the right questions.
Yes. We serve Tempe from downtown and the ASU neighborhoods out to the city’s edges, plus the nearby Valley communities. If you’re unsure whether your address is covered, call (833) 906-6774 and we’ll confirm before booking anything.
Whether your Tempe chimney needs a fall inspection, a sweep before the first cold-snap fire, or a repair once we’ve seen what’s up there, we’d rather look first and tell you the truth than sell you work you don’t need. Nothing gets recommended without camera evidence you can see for yourself. Call (833) 906-6774 for a free estimate. Our technicians have up to 15 years of experience, we work with top-tier chimney brands, and the written estimate sets the final price.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tempe Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Doug Barrett"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Carrie Pruitt"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Alma Castillo